Quickstart: Create a policy assignment to identify non-compliant resources by using a Bicep file

Article
02/27/2024

In this quickstart, you use a Bicep file to create a policy assignment that validates resource's compliance with an Azure policy. The policy is assigned to a resource group and audits virtual machines that don't use managed disks. After you create the policy assignment, you identify non-compliant virtual machines.

Bicep is a domain-specific language (DSL) that uses declarative syntax to deploy Azure resources. It provides concise syntax, reliable type safety, and support for code reuse. Bicep offers the best authoring experience for your infrastructure-as-code solutions in Azure.

Prerequisites

If you don't have an Azure account, create a free account before you begin.
Bicep.
Azure PowerShell or Azure CLI.
Visual Studio Code and the Bicep extension for Visual Studio Code.
Microsoft.PolicyInsights must be registered in your Azure subscription. To register a resource provider, you must have permission to register resource providers. That permission is included in the Contributor and Owner roles.
A resource group with at least one virtual machine that doesn't use managed disks.

Review the Bicep file

The Bicep file creates a policy assignment for a resource group scope and assigns the built-in policy definition Audit VMs that do not use managed disks.

Create the following Bicep file as policy-assignment.bicep.

Open Visual Studio Code and select File > New Text File.
Copy and paste the Bicep file into Visual Studio Code.
Select File > Save and use the filename policy-assignment.bicep.

param policyAssignmentName string = 'audit-vm-managed-disks'
param policyDefinitionID string = '/providers/Microsoft.Authorization/policyDefinitions/06a78e20-9358-41c9-923c-fb736d382a4d'
param policyDisplayName string = 'Audit VM managed disks'

resource assignment 'Microsoft.Authorization/policyAssignments@2023-04-01' = {
  name: policyAssignmentName
  scope: resourceGroup()
  properties: {
    policyDefinitionId: policyDefinitionID
    description: 'Policy assignment to resource group scope created with Bicep file'
    displayName: policyDisplayName
    nonComplianceMessages: [
      {
        message: 'Virtual machines should use managed disks'
      }
    ]
  }
}

output assignmentId string = assignment.id

The resource type defined in the Bicep file is Microsoft.Authorization/policyAssignments.

The Bicep file uses three parameters to deploy the policy assignment:

policyAssignmentName creates the policy assignment named audit-vm-managed-disks.
policyDefinitionID uses the ID of the built-in policy definition. For reference, the commands to get the ID are in the section to deploy the template.
policyDisplayName creates a display name that's visible in Azure portal.

For more information about Bicep files:

To find more Bicep samples, go to Browse code samples.
To learn more about template reference's for deployments, go to Azure template reference.
To learn how to develop Bicep files, go to Bicep documentation.
To learn about subscription-level deployments, go to Subscription deployments with Bicep files.

Deploy the Bicep file

You can deploy the Bicep file with Azure PowerShell or Azure CLI.

From a Visual Studio Code terminal session, connect to Azure. If you have more than one subscription, run the commands to set context to your subscription. Replace <subscriptionID> with your Azure subscription ID.

PowerShell
Azure CLI

Connect-AzAccount

# Run these commands if you have multiple subscriptions
Get-AzSubScription
Set-AzContext -Subscription <subscriptionID>

az login

# Run these commands if you have multiple subscriptions
az account list --output table
az account set --subscription <subscriptionID>

You can verify if Microsoft.PolicyInsights is registered. If it isn't, you can run a command to register the resource provider.

PowerShell
Azure CLI

Get-AzResourceProvider -ProviderNamespace 'Microsoft.PolicyInsights' |
   Select-Object -Property ResourceTypes, RegistrationState

Register-AzResourceProvider -ProviderNamespace 'Microsoft.PolicyInsights'

For more information, go to Get-AzResourceProvider and Register-AzResourceProvider.

az provider show \
  --namespace Microsoft.PolicyInsights \
  --query "{Provider:namespace,State:registrationState}" \
  --output table

az provider register --namespace Microsoft.PolicyInsights

The Azure CLI commands use a backslash (\) for line continuation to improve readability. For more information, go to az provider.

The following commands display the policyDefinitionID parameter's value:

PowerShell
Azure CLI

(Get-AzPolicyDefinition |
  Where-Object { $_.Properties.DisplayName -eq 'Audit VMs that do not use managed disks' }).ResourceId

az policy definition list \
  --query "[?displayName=='Audit VMs that do not use managed disks']".id \
  --output tsv

The following commands deploy the policy definition to your resource group. Replace <resourceGroupName> with your resource group name:

PowerShell
Azure CLI

$rg = Get-AzResourceGroup -Name '<resourceGroupName>'

$deployparms = @{
Name = 'PolicyDeployment'
ResourceGroupName = $rg.ResourceGroupName
TemplateFile = 'policy-assignment.bicep'
}

New-AzResourceGroupDeployment @deployparms

The $rg variable stores properties for the resource group. The $deployparms variable uses splatting to create parameter values and improve readability. The New-AzResourceGroupDeployment command uses the parameter values defined in the $deployparms variable.

Name is the deployment name displayed in the output and in Azure for the resource group's deployments.
ResourceGroupName uses the $rg.ResourceGroupName property to get the name of your resource group where the policy is assigned.
TemplateFile specifies the Bicep file's name and location on your local computer.

rgname=$(az group show --resource-group <resourceGroupName> --query name --output tsv)

az deployment group create \
  --name PolicyDeployment \
  --resource-group $rgname \
  --template-file policy-assignment.bicep

The rgname variable uses an expression to get your resource group's name used in the deployment command.

name is the deployment name displayed in the output and in Azure for the resource group's deployments.
resource-group is the name of your resource group where the policy is assigned.
template-file specifies the Bicep file's name and location on your local computer.

You can verify the policy assignment's deployment with the following command:

PowerShell
Azure CLI

The command uses the $rg.ResourceId property to get the resource group's ID.

Get-AzPolicyAssignment -Name 'audit-vm-managed-disks' -Scope $rg.ResourceId

Name               : audit-vm-managed-disks
ResourceId         : /subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.Authorization/policyAssignments/audit-vm-managed-disks
ResourceName       : audit-vm-managed-disks
ResourceGroupName  : {resourceGroupName}
ResourceType       : Microsoft.Authorization/policyAssignments
SubscriptionId     : {subscriptionId}
PolicyAssignmentId : /subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.Authorization/policyAssignments/audit-vm-managed-disks
Properties         : Microsoft.Azure.Commands.ResourceManager.Cmdlets.Implementation.Policy.PsPolicyAssignmentProperties

For more information, go to Get-AzPolicyAssignment.

The rgid variable uses an expression to get the resource group's ID used to show the policy assignment.

rgid=$(az group show --resource-group $rgname --query id --output tsv)

az policy assignment show --name "audit-vm-managed-disks" --scope $rgid

The output is verbose but resembles the following example:

"description": "Policy assignment to resource group scope created with Bicep file",
"displayName": "Audit VM managed disks",
"enforcementMode": "Default",
"id": "/subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.Authorization/policyAssignments/audit-vm-managed-disks",
"identity": null,
"location": null,
"metadata": {
  "createdBy": "11111111-1111-1111-1111-111111111111",
  "createdOn": "2024-02-20T20:57:09.574944Z",
  "updatedBy": null,
  "updatedOn": null
},
"name": "audit-vm-managed-disks",
"nonComplianceMessages": [
  {
    "message": "Virtual machines should use managed disks",
    "policyDefinitionReferenceId": null
  }
]

For more information, go to az policy assignment.

Identify non-compliant resources

After the policy assignment is deployed, virtual machines that are deployed to the resource group are audited for compliance with the managed disk policy.

The compliance state for a new policy assignment takes a few minutes to become active and provide results about the policy's state.

PowerShell
Azure CLI

$complianceparms = @{
ResourceGroupName = $rg.ResourceGroupName
PolicyAssignmentName = 'audit-vm-managed-disks'
Filter = 'IsCompliant eq false'
}

Get-AzPolicyState @complianceparms

The $complianceparms variable creates parameter values used in the Get-AzPolicyState command.

ResourceGroupName gets the resource group name from the $rg.ResourceGroupName property.
PolicyAssignmentName specifies the name used when the policy assignment was created.
Filter uses an expression to find resources that aren't compliant with the policy assignment.

Your results resemble the following example and ComplianceState shows NonCompliant:

Timestamp                : 2/20/2024 18:55:45
ResourceId               : /subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/microsoft.compute/virtualmachines/{vmId}
PolicyAssignmentId       : /subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/microsoft.authorization/policyassignments/audit-vm-managed-disks
PolicyDefinitionId       : /providers/microsoft.authorization/policydefinitions/06a78e20-9358-41c9-923c-fb736d382a4d
IsCompliant              : False
SubscriptionId           : {subscriptionId}
ResourceType             : Microsoft.Compute/virtualMachines
ResourceLocation         : {location}
ResourceGroup            : {resourceGroupName}
ResourceTags             : tbd
PolicyAssignmentName     : audit-vm-managed-disks
PolicyAssignmentOwner    : tbd
PolicyAssignmentScope    : /subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}
PolicyDefinitionName     : 06a78e20-9358-41c9-923c-fb736d382a4d
PolicyDefinitionAction   : audit
PolicyDefinitionCategory : tbd
ManagementGroupIds       : {managementGroupId}
ComplianceState          : NonCompliant
AdditionalProperties     : {[complianceReasonCode, ]}

For more information, go to Get-AzPolicyState.

policyid=$(az policy assignment show \
  --name "audit-vm-managed-disks" \
  --scope $rgid \
  --query id \
  --output tsv)

az policy state list --resource $policyid --filter "(isCompliant eq false)"

The policyid variable uses an expression to get the policy assignment's ID. The filter parameter limits the output to non-compliant resources.

The az policy state list output is verbose, but for this article the complianceState shows NonCompliant.

"complianceState": "NonCompliant",
"components": null,
"effectiveParameters": "",
"isCompliant": false,

For more information, go to az policy state.

Remove-AzPolicyAssignment -Name 'audit-vm-managed-disks' -Scope $rg.ResourceId

To sign out of your Azure PowerShell session:

Disconnect-AzAccount

az policy assignment delete --name "audit-vm-managed-disks" --scope $rgid

To sign out of your Azure CLI session:

az logout

Next steps

In this quickstart, you assigned a policy definition to identify non-compliant resources in your Azure environment.

To learn more about how to assign policies that validate resource compliance, continue to the tutorial.

Tutorial: Create and manage policies to enforce compliance

Share via