Edit

Share via

dotnet restore

  • Article

This article applies to: ✔️ .NET Core 3.1 SDK and later versions

Name

dotnet restore - Restores the dependencies and tools of a project.

Synopsis

dotnet restore [<ROOT>] [--configfile <FILE>] [--disable-build-servers]
    [--disable-parallel]
    [-f|--force] [--force-evaluate] [--ignore-failed-sources]
    [--interactive] [--lock-file-path <LOCK_FILE_PATH>] [--locked-mode]
    [--no-cache] [--no-dependencies] [--packages <PACKAGES_DIRECTORY>]
    [-r|--runtime <RUNTIME_IDENTIFIER>] [-s|--source <SOURCE>]
    [--tl:[auto|on|off]] [--use-current-runtime, --ucr [true|false]]
    [--use-lock-file] [-v|--verbosity <LEVEL>]

dotnet restore -h|--help

Description

A .NET project typically references external libraries in NuGet packages that provide additional functionality. These external dependencies are referenced in the project file (.csproj or .vbproj). When you run the dotnet restore command, the .NET CLI uses NuGet to look for these dependencies and download them if necessary. It also ensures that all the dependencies required by the project are compatible with each other and that there are no conflicts between them. Once the command is completed, all the dependencies required by the project are available in a local cache and can be used by the .NET CLI to build and run the application.

In most cases, you don't need to explicitly use the dotnet restore command, since if a NuGet restore is necessary, the following commands run it implicitly:

Sometimes, it might be inconvenient to run the implicit NuGet restore with these commands. For example, some automated systems, such as build systems, need to call dotnet restore explicitly to control when the restore occurs so that they can control network usage. To prevent the implicit NuGet restore, you can use the --no-restore flag with any of these commands.

Note

Signed package verification during restore operations requires a certificate root store that is valid for both code signing and timestamping. For more inforomation, see NuGet signed package verification.

Specify feeds

To restore the dependencies, NuGet needs the feeds where the packages are located. Feeds are usually provided via the nuget.config configuration file. A default configuration file is provided when the .NET SDK is installed. To specify additional feeds, do one of the following:

You can override the nuget.config feeds with the -s option.

For information about how to use authenticated feeds, see Consuming packages from authenticated feeds.

Global packages folder

For dependencies, you can specify where the restored packages are placed during the restore operation using the --packages argument. If not specified, the default NuGet package cache is used, which is found in the .nuget/packages directory in the user's home directory on all operating systems. For example, /home/user1 on Linux or C:\Users\user1 on Windows.

Project-specific tooling

For project-specific tooling, dotnet restore first restores the package in which the tool is packed, and then proceeds to restore the tool's dependencies as specified in its project file.

nuget.config differences

The behavior of the dotnet restore command is affected by the settings in the nuget.config file, if present. For example, setting the globalPackagesFolder in nuget.config places the restored NuGet packages in the specified folder. This is an alternative to specifying the --packages option on the dotnet restore command. For more information, see the nuget.config reference.

There are three specific settings that dotnet restore ignores:

  • bindingRedirects

    Binding redirects don't work with <PackageReference> elements and .NET only supports <PackageReference> elements for NuGet packages.

  • solution

    This setting is Visual Studio specific and doesn't apply to .NET. .NET doesn't use a packages.config file and instead uses <PackageReference> elements for NuGet packages.

  • trustedSigners

    Support for cross-platform package signature verification was added in the .NET 5.0.100 SDK.

Workload manifest downloads

When you run this command, it initiates an asynchronous background download of advertising manifests for workloads. If the download is still running when this command finishes, the download is stopped. For more information, see Advertising manifests.

Arguments

  • ROOT

    Optional path to the project file to restore.

Options

  • -a|--arch <ARCHITECTURE>

    Specifies the target architecture. This is a shorthand syntax for setting the Runtime Identifier (RID), where the provided value is combined with the default RID. For example, on a win-x64 machine, specifying --arch x86 sets the RID to win-x86. If you use this option, don't use the -r|--runtime option. Available since .NET 6 Preview 7.

  • --configfile <FILE>

    The NuGet configuration file (nuget.config) to use. If specified, only the settings from this file will be used. If not specified, the hierarchy of configuration files from the current directory will be used. For more information, see Common NuGet Configurations.

  • --disable-build-servers

    Forces the command to ignore any persistent build servers. This option provides a consistent way to disable all use of build caching, which forces a build from scratch. A build that doesn't rely on caches is useful when the caches might be corrupted or incorrect for some reason. Available since .NET 7 SDK.

  • --disable-parallel

    Disables restoring multiple projects in parallel.

  • --force

    Forces all dependencies to be resolved even if the last restore was successful. Specifying this flag is the same as deleting the project.assets.json file.

  • --force-evaluate

    Forces restore to reevaluate all dependencies even if a lock file already exists.

  • -?|-h|--help

    Prints out a description of how to use the command.

  • --ignore-failed-sources

    Only warn about failed sources if there are packages meeting the version requirement.

  • --interactive

    Allows the command to stop and wait for user input or action. For example, to complete authentication.

  • --lock-file-path <LOCK_FILE_PATH>

    Output location where project lock file is written. By default, this is PROJECT_ROOT\packages.lock.json.

  • --locked-mode

    Don't allow updating project lock file.

  • --no-cache

    Specifies to not cache HTTP requests.

  • --no-dependencies

    When restoring a project with project-to-project (P2P) references, restores the root project and not the references.

  • --packages <PACKAGES_DIRECTORY>

    Specifies the directory for restored packages.

  • -r|--runtime <RUNTIME_IDENTIFIER>

    Specifies a runtime for the package restore. This is used to restore packages for runtimes not explicitly listed in the <RuntimeIdentifiers> tag in the .csproj file. For a list of Runtime Identifiers (RIDs), see the RID catalog.

  • -s|--source <SOURCE>

    Specifies the URI of the NuGet package source to use during the restore operation. This setting overrides all of the sources specified in the nuget.config files. Multiple sources can be provided by specifying this option multiple times.

  • --tl:[auto|on|off]

    Specifies whether the terminal logger should be used for the build output. The default is auto, which first verifies the environment before enabling terminal logging. The environment check verifies that the terminal is capable of using modern output features and isn't using a redirected standard output before enabling the new logger. on skips the environment check and enables terminal logging. off skips the environment check and uses the default console logger.

    The terminal logger shows you the restore phase followed by the build phase. During each phase, the currently building projects appear at the bottom of the terminal. Each project that's building outputs both the MSBuild target currently being built and the amount of time spent on that target. You can search this information to learn more about the build. When a project is finished building, a single "build completed" section is written that captures:

    • The name of the built project.
    • The target framework (if multi-targeted).
    • The status of that build.
    • The primary output of that build (which is hyperlinked).
    • Any diagnostics generated for that project.

    This option is available starting in .NET 8.

  • --use-current-runtime, --ucr [true|false]

    Sets the RuntimeIdentifier to a platform portable RuntimeIdentifier based on the one of your machine. This happens implicitly with properties that require a RuntimeIdentifier, such as SelfContained, PublishAot, PublishSelfContained, PublishSingleFile, and PublishReadyToRun. If the property is set to false, that implicit resolution will no longer occur.

  • --use-lock-file

    Enables project lock file to be generated and used with restore.

  • -v|--verbosity <LEVEL>

    Sets the verbosity level of the command. Allowed values are q[uiet], m[inimal], n[ormal], d[etailed], and diag[nostic]. The default is minimal. For more information, see LoggerVerbosity.

Examples

  • Restore dependencies and tools for the project in the current directory:

    dotnet restore

  • Restore dependencies and tools for the app1 project found in the given path:

    dotnet restore ./projects/app1/app1.csproj

  • Restore the dependencies and tools for the project in the current directory using the file path provided as the source:

    dotnet restore -s c:\packages\mypackages

  • Restore the dependencies and tools for the project in the current directory using the two file paths provided as sources:

    dotnet restore -s c:\packages\mypackages -s c:\packages\myotherpackages

  • Restore dependencies and tools for the project in the current directory showing detailed output:

    dotnet restore --verbosity detailed

Audit for security vulnerabilities

Starting in .NET 8, you can opt into NuGet security auditing for dotnet restore. This auditing produces a report of security vulnerabilities with the affected package name, the severity of the vulnerability, and a link to the advisory for more details.

To opt into security auditing, set the <NuGetAudit> MSBuild property to true in your project file. Additionally, to retrieve the known vulnerability dataset, ensure that you have the NuGet.org central registry defined as one of your package sources:

<packageSources>
    <add key="nuget.org" value="https://api.nuget.org/v3/index.json" protocolVersion="3" />
</packageSources>

You can configure the level at which auditing will fail by setting the <NuGetAuditLevel> MSBuild property. Possible values are low, moderate, high, and critical. For example if you only want to see moderate, high, and critical advisories, you can set the property to moderate.