Key Security Concepts

.NET offers role-based security to help address security concerns about mobile code and to provide support that enables components to determine what users are authorized to do.

Type safety and security

Type-safe code accesses only the memory locations it is authorized to access. (For this discussion, type safety specifically refers to memory type safety and should not be confused with type safety in a broader respect.) For example, type-safe code cannot read values from another object's private fields. It accesses types only in well-defined, allowable ways.

During just-in-time (JIT) compilation, an optional verification process examines the metadata and common intermediate language (CIL) of a method to be JIT-compiled into native machine code to verify that they are type safe. This process is skipped if the code has permission to bypass verification. For more information about verification, see Managed Execution Process.

Although verification of type safety is not mandatory to run managed code, type safety plays a crucial role in assembly isolation and security enforcement. When code is type safe, the common language runtime can completely isolate assemblies from each other. This isolation helps ensure that assemblies cannot adversely affect each other and it increases application reliability. Type-safe components can execute safely in the same process even if they are trusted at different levels. When code is not type safe, unwanted side effects can occur. For example, the runtime cannot prevent managed code from calling into native (unmanaged) code and performing malicious operations. When code is type safe, the runtime's security enforcement mechanism ensures that it does not access native code unless it has permission to do so. All code that is not type safe must have been granted SecurityPermission with the passed enum member SkipVerification to run.

Principal

A principal represents the identity and role of a user and acts on the user's behalf. Role-based security in .NET supports three kinds of principals:

• Generic principals represent users and roles that exist independent of Windows users and roles.

• Windows principals represent Windows users and their roles (or their Windows groups). A Windows principal can impersonate another user, which means that the principal can access a resource on a user's behalf while presenting the identity that belongs to that user.

• Custom principals can be defined by an application in any way that is needed for that particular application. They can extend the basic notion of the principal's identity and roles.

For more information, see Principal and Identity Objects.

Authentication

Authentication is the process of discovering and verifying the identity of a principal by examining the user's credentials and validating those credentials against some authority. The information obtained during authentication is directly usable by your code. You can also use .NET role-based security to authenticate the current user and to determine whether to allow that principal to access your code. See the overloads of the WindowsPrincipal.IsInRole method for examples of how to authenticate the principal for specific roles. For example, you can use the WindowsPrincipal.IsInRole(String) overload to determine if the current user is a member of the Administrators group.

A variety of authentication mechanisms are used today, many of which can be used with .NET role-based security. Some of the most commonly used mechanisms are basic, digest, Passport, operating system (such as NTLM or Kerberos), or application-defined mechanisms.

Example

The following example requires that the active principal be an administrator. The name parameter is null, which allows any user who is an administrator to pass the demand.

using namespace System;
using namespace System::Security;
using namespace System::Security::Permissions;
using namespace System::Security::Policy;
using namespace System::Security::Principal;

int main(array<System::String ^> ^args)
{
    System::String^ null;
    AppDomain::CurrentDomain->SetPrincipalPolicy(PrincipalPolicy::WindowsPrincipal);
    PrincipalPermission^ principalPerm = gcnew PrincipalPermission(null, "Administrators" );
      principalPerm->Demand();
      Console::WriteLine("Demand succeeded");
    return 0;
}

using System;
using System.Threading;
using System.Security.Permissions;
using System.Security.Principal;

class SecurityPrincipalDemo
{

    public static void Main()
    {
        AppDomain.CurrentDomain.SetPrincipalPolicy(PrincipalPolicy.WindowsPrincipal);
        PrincipalPermission principalPerm = new PrincipalPermission(null, "Administrators");
        principalPerm.Demand();
        Console.WriteLine("Demand succeeded.");
    }
}

Imports System.Threading
Imports System.Security.Permissions
Imports System.Security.Principal



Class SecurityPrincipalDemo


    Public Shared Sub Main()
        AppDomain.CurrentDomain.SetPrincipalPolicy(PrincipalPolicy.WindowsPrincipal)
        Dim principalPerm As New PrincipalPermission(Nothing, "Administrators")
        principalPerm.Demand()
        Console.WriteLine("Demand succeeded.")

    End Sub
End Class

The following example demonstrates how to determine the identity of the principal and the roles available to the principal. An application of this example might be to confirm that the current user is in a role you allow for using your application.

public:
   static void DemonstrateWindowsBuiltInRoleEnum()
   {
      AppDomain^ myDomain = Thread::GetDomain();

      myDomain->SetPrincipalPolicy( PrincipalPolicy::WindowsPrincipal );
      WindowsPrincipal^ myPrincipal = dynamic_cast<WindowsPrincipal^>(Thread::CurrentPrincipal);

      Console::WriteLine( "{0} belongs to: ", myPrincipal->Identity->Name );

      Array^ wbirFields = Enum::GetValues( WindowsBuiltInRole::typeid );

      for each ( Object^ roleName in wbirFields )
      {
         try
         {
            Console::WriteLine( "{0}? {1}.", roleName,
               myPrincipal->IsInRole(  *dynamic_cast<WindowsBuiltInRole^>(roleName) ) );
         }
         catch ( Exception^ ) 
         {
            Console::WriteLine( "{0}: Could not obtain role for this RID.",
               roleName );
         }
      }
   }

using System;
using System.Threading;
using System.Security.Permissions;
using System.Security.Principal;

class SecurityPrincipalDemo
{
    public static void DemonstrateWindowsBuiltInRoleEnum()
    {
        AppDomain myDomain = Thread.GetDomain();

        myDomain.SetPrincipalPolicy(PrincipalPolicy.WindowsPrincipal);
        WindowsPrincipal myPrincipal = (WindowsPrincipal)Thread.CurrentPrincipal;
        Console.WriteLine("{0} belongs to: ", myPrincipal.Identity.Name.ToString());
        Array wbirFields = Enum.GetValues(typeof(WindowsBuiltInRole));
        foreach (object roleName in wbirFields)
        {
            try
            {
                // Cast the role name to a RID represented by the WindowsBuildInRole value.
                Console.WriteLine("{0}? {1}.", roleName,
                    myPrincipal.IsInRole((WindowsBuiltInRole)roleName));
                Console.WriteLine("The RID for this role is: " + ((int)roleName).ToString());
            }
            catch (Exception)
            {
                Console.WriteLine("{0}: Could not obtain role for this RID.",
                    roleName);
            }
        }
        // Get the role using the string value of the role.
        Console.WriteLine("{0}? {1}.", "Administrators",
            myPrincipal.IsInRole("BUILTIN\\" + "Administrators"));
        Console.WriteLine("{0}? {1}.", "Users",
            myPrincipal.IsInRole("BUILTIN\\" + "Users"));
        // Get the role using the WindowsBuiltInRole enumeration value.
        Console.WriteLine("{0}? {1}.", WindowsBuiltInRole.Administrator,
           myPrincipal.IsInRole(WindowsBuiltInRole.Administrator));
        // Get the role using the WellKnownSidType.
        SecurityIdentifier sid = new SecurityIdentifier(WellKnownSidType.BuiltinAdministratorsSid, null);
        Console.WriteLine("WellKnownSidType BuiltinAdministratorsSid  {0}? {1}.", sid.Value, myPrincipal.IsInRole(sid));
    }

    public static void Main()
    {
        DemonstrateWindowsBuiltInRoleEnum();
    }
}

Imports System.Threading
Imports System.Security.Permissions
Imports System.Security.Principal

Class SecurityPrincipalDemo

    Public Shared Sub DemonstrateWindowsBuiltInRoleEnum()
        Dim myDomain As AppDomain = Thread.GetDomain()

        myDomain.SetPrincipalPolicy(PrincipalPolicy.WindowsPrincipal)
        Dim myPrincipal As WindowsPrincipal = CType(Thread.CurrentPrincipal, WindowsPrincipal)
        Console.WriteLine("{0} belongs to: ", myPrincipal.Identity.Name.ToString())
        Dim wbirFields As Array = [Enum].GetValues(GetType(WindowsBuiltInRole))
        Dim roleName As Object
        For Each roleName In wbirFields
            Try
                ' Cast the role name to a RID represented by the WindowsBuildInRole value.
                Console.WriteLine("{0}? {1}.", roleName, myPrincipal.IsInRole(CType(roleName, WindowsBuiltInRole)))
                Console.WriteLine("The RID for this role is: " + Fix(roleName).ToString())

            Catch
                Console.WriteLine("{0}: Could not obtain role for this RID.", roleName)
            End Try
        Next roleName
        ' Get the role using the string value of the role.
        Console.WriteLine("{0}? {1}.", "Administrators", myPrincipal.IsInRole("BUILTIN\" + "Administrators"))
        Console.WriteLine("{0}? {1}.", "Users", myPrincipal.IsInRole("BUILTIN\" + "Users"))
        ' Get the role using the WindowsBuiltInRole enumeration value.
        Console.WriteLine("{0}? {1}.", WindowsBuiltInRole.Administrator, myPrincipal.IsInRole(WindowsBuiltInRole.Administrator))
        ' Get the role using the WellKnownSidType.
        Dim sid As New SecurityIdentifier(WellKnownSidType.BuiltinAdministratorsSid, Nothing)
        Console.WriteLine("WellKnownSidType BuiltinAdministratorsSid  {0}? {1}.", sid.Value, myPrincipal.IsInRole(sid))

    End Sub

    Public Shared Sub Main()
        DemonstrateWindowsBuiltInRoleEnum()

    End Sub
End Class

Authorization

Authorization is the process of determining whether a principal is allowed to perform a requested action. Authorization occurs after authentication and uses information about the principal's identity and roles to determine what resources the principal can access. You can use .NET role-based security to implement authorization.

See also

• ASP.NET Core Security