14 Namespaces

Article
02/07/2024

14.1 General

C# programs are organized using namespaces. Namespaces are used both as an “internal” organization system for a program, and as an “external” organization system—a way of presenting program elements that are exposed to other programs.

Using directives (§14.5) are provided to facilitate the use of namespaces.

14.2 Compilation units

A compilation_unit consists of zero or more extern_alias_directives followed by zero or more using_directives followed by zero or one global_attributes followed by zero or more namespace_member_declarations. The compilation_unit defines the overall structure of the input.

compilation_unit
    : extern_alias_directive* using_directive* global_attributes?
      namespace_member_declaration*
    ;

A C# program consists of one or more compilation units. When a C# program is compiled, all of the compilation units are processed together. Thus, compilation units can depend on each other, possibly in a circular fashion.

The extern_alias_directives of a compilation unit affect the using_directives, global_attributes and namespace_member_declarations of that compilation unit, but have no effect on other compilation units.

The using_directives of a compilation unit affect the global_attributes and namespace_member_declarations of that compilation unit, but have no effect on other compilation units.

The global_attributes (§22.3) of a compilation unit permit the specification of attributes for the target assembly and module. Assemblies and modules act as physical containers for types. An assembly may consist of several physically separate modules.

The namespace_member_declarations of each compilation unit of a program contribute members to a single declaration space called the global namespace.

Example:
// File A.cs:
class A {}
// File B.cs:
class B {}
The two compilation units contribute to the single global namespace, in this case declaring two classes with the fully qualified names A and B. Because the two compilation units contribute to the same declaration space, it would have been an error if each contained a declaration of a member with the same name.

end example

14.3 Namespace declarations

A namespace_declaration consists of the keyword namespace, followed by a namespace name and body, optionally followed by a semicolon.

namespace_declaration
    : 'namespace' qualified_identifier namespace_body ';'?
    ;

qualified_identifier
    : identifier ('.' identifier)*
    ;

namespace_body
    : '{' extern_alias_directive* using_directive*
      namespace_member_declaration* '}'
    ;

A namespace_declaration may occur as a top-level declaration in a compilation_unit or as a member declaration within another namespace_declaration. When a namespace_declaration occurs as a top-level declaration in a compilation_unit, the namespace becomes a member of the global namespace. When a namespace_declaration occurs within another namespace_declaration, the inner namespace becomes a member of the outer namespace. In either case, the name of a namespace shall be unique within the containing namespace.

Namespaces are implicitly public and the declaration of a namespace cannot include any access modifiers.

Within a namespace_body, the optional using_directives import the names of other namespaces, types and members, allowing them to be referenced directly instead of through qualified names. The optional namespace_member_declarations contribute members to the declaration space of the namespace. Note that all using_directives shall appear before any member declarations.

The qualified_identifier of a namespace_declaration may be a single identifier or a sequence of identifiers separated by “.” tokens. The latter form permits a program to define a nested namespace without lexically nesting several namespace declarations.

Example:

namespace N1.N2
{
    class A {}
    class B {}
}

is semantically equivalent to

namespace N1
{
    namespace N2
    {
        class A {}
        class B {}
    }
}

end example

Namespaces are open-ended, and two namespace declarations with the same fully qualified name (§7.8.2) contribute to the same declaration space (§7.3).

Example: In the following code
namespace N1.N2
{
    class A {}
}

namespace N1.N2
{
    class B {}
}
the two namespace declarations above contribute to the same declaration space, in this case declaring two classes with the fully qualified names N1.N2.A and N1.N2.B. Because the two declarations contribute to the same declaration space, it would have been an error if each contained a declaration of a member with the same name.

end example

14.4 Extern alias directives

An extern_alias_directive introduces an identifier that serves as an alias for a namespace. The specification of the aliased namespace is external to the source code of the program and applies also to nested namespaces of the aliased namespace.

extern_alias_directive
    : 'extern' 'alias' identifier ';'
    ;

The scope of an extern_alias_directive extends over the using_directives, global_attributes and namespace_member_declarations of its immediately containing compilation_unit or namespace_body.

Within a compilation unit or namespace body that contains an extern_alias_directive, the identifier introduced by the extern_alias_directive can be used to reference the aliased namespace. It is a compile-time error for the identifier to be the word global.

The alias introduced by an extern_alias_directive is very similar to the alias introduced by a using_alias_directive. See §14.5.2 for more detailed discussion of extern_alias_directives and using_alias_directives.

alias is a contextual keyword (§6.4.4) and only has special meaning when it immediately follows the extern keyword in an extern_alias_directive.

An error occurs if a program declares an extern alias for which no external definition is provided.

Example: The following program declares and uses two extern aliases, X and Y, each of which represent the root of a distinct namespace hierarchy:
extern alias X;
extern alias Y;

class Test
{
    X::N.A a;
    X::N.B b1;
    Y::N.B b2;
    Y::N.C c;
}
The program declares the existence of the extern aliases X and Y, but the actual definitions of the aliases are external to the program. The identically named N.B classes can now be referenced as X.N.B and Y.N.B, or, using the namespace alias qualifier, X::N.B and Y::N.B. end example

14.5 Using directives

14.5.1 General

Using directives facilitate the use of namespaces and types defined in other namespaces. Using directives impact the name resolution process of namespace_or_type_names (§7.8) and simple_names (§12.8.4), but unlike declarations, using_directives do not contribute new members to the underlying declaration spaces of the compilation units or namespaces within which they are used.

using_directive
    : using_alias_directive
    | using_namespace_directive
    | using_static_directive    
    ;

A using_alias_directive (§14.5.2) introduces an alias for a namespace or type.

A using_namespace_directive (§14.5.3) imports the type members of a namespace.

A using_static_directive (§14.5.4) imports the nested types and static members of a type.

The scope of a using_directive extends over the namespace_member_declarations of its immediately containing compilation unit or namespace body. The scope of a using_directive specifically does not include its peer using_directives. Thus, peer using_directives do not affect each other, and the order in which they are written is insignificant. In contrast, the scope of an extern_alias_directive includes the using_directives defined in the same compilation unit or namespace body.

14.5.2 Using alias directives

A using_alias_directive introduces an identifier that serves as an alias for a namespace or type within the immediately enclosing compilation unit or namespace body.

using_alias_directive
    : 'using' identifier '=' namespace_or_type_name ';'
    ;

Within global attributes and member declarations in a compilation unit or namespace body that contains a using_alias_directive, the identifier introduced by the using_alias_directive can be used to reference the given namespace or type.

Example:
namespace N1.N2
{
    class A {}
}
namespace N3
{
    using A = N1.N2.A;

    class B: A {}
}
Above, within member declarations in the N3 namespace, A is an alias for N1.N2.A, and thus class N3.B derives from class N1.N2.A. The same effect can be obtained by creating an alias R for N1.N2 and then referencing R.A:
namespace N3
{
    using R = N1.N2;

    class B : R.A {}
}
end example

Within using directives, global attributes and member declarations in a compilation unit or namespace body that contains an extern_alias_directive, the identifier introduced by the extern_alias_directive can be used to reference the associated namespace.

Example: For example:
namespace N1
{
    extern alias N2;

    class B : N2::A {}
}
Above, within member declarations in the N1 namespace, N2 is an alias for some namespace whose definition is external to the source code of the program. Class N1.B derives from class N2.A. The same effect can be obtained by creating an alias A for N2.A and then referencing A:
namespace N1
{
    extern alias N2;

    using A = N2::A;

    class B : A {}
}
end example

An extern_alias_directive or using_alias_directive makes an alias available within a particular compilation unit or namespace body, but it does not contribute any new members to the underlying declaration space. In other words, an alias directive is not transitive, but, rather, affects only the compilation unit or namespace body in which it occurs.

Example: In the following code
namespace N3
{
    extern alias R1;

    using R2 = N1.N2;
}

namespace N3
{
    class B : R1::A, R2.I {} // Error, R1 and R2 unknown
}
the scopes of the alias directives that introduce R1 and R2 only extend to member declarations in the namespace body in which they are contained, so R1 and R2 are unknown in the second namespace declaration. However, placing the alias directives in the containing compilation unit causes the alias to become available within both namespace declarations:
extern alias R1;

using R2 = N1.N2;

namespace N3
{
    class B : R1::A, R2.I {}
}

namespace N3
{
    class C : R1::A, R2.I {}
}
end example

Each extern_alias_directive or using_alias_directive in a compilation_unit or namespace_body contributes a name to the alias declaration space (§7.3) of the immediately enclosing compilation_unit or namespace_body. The identifier of the alias directive shall be unique within the corresponding alias declaration space. The alias identifier need not be unique within the global declaration space or the declaration space of the corresponding namespace.

Example:
extern alias X;
extern alias Y;

using X = N1.N2; // Error: alias X already exists

class Y {} // Ok
The using alias named X causes an error since there is already an alias named X in the same compilation unit. The class named Y does not conflict with the extern alias named Y since these names are added to distinct declaration spaces. The former is added to the global declaration space and the latter is added to the alias declaration space for this compilation unit.

When an alias name matches the name of a member of a namespace, usage of either shall be appropriately qualified:
namespace N1.N2
{
    class B {}
}

namespace N3
{
    class A {}
    class B : A {}
}

namespace N3
{
    using A = N1.N2;
    using B = N1.N2.B;

    class W : B {} // Error: B is ambiguous
    class X : A.B {} // Error: A is ambiguous
    class Y : A::B {} // Ok: uses N1.N2.B
    class Z : N3.B {} // Ok: uses N3.B
}
In the second namespace body for N3, unqualified use of B results in an error, since N3 contains a member named B and the namespace body that also declares an alias with name B; likewise for A. The class N3.B can be referenced as N3.B or global::N3.B. The alias A can be used in a qualified-alias-member (§14.8), such as A::B. The alias B is essentially useless. It cannot be used in a qualified_alias_member since only namespace aliases can be used in a qualified_alias_member and B aliases a type.

end example

Just like regular members, names introduced by alias_directives are hidden by similarly named members in nested scopes.

Example: In the following code
using R = N1.N2;

namespace N3
{
    class R {}
    class B: R.A {} // Error, R has no member A
}
the reference to R.A in the declaration of B causes a compile-time error because R refers to N3.R, not N1.N2.

end example

The order in which extern_alias_directives are written has no significance. Likewise, the order in which using_alias_directives are written has no significance, but all using_alias_directives shall come after all extern_alias_directives in the same compilation unit or namespace body. Resolution of the namespace_or_type_name referenced by a using_alias_directive is not affected by the using_alias_directive itself or by other using_directives in the immediately containing compilation unit or namespace body, but may be affected by extern_alias_directives in the immediately containing compilation unit or namespace body. In other words, the namespace_or_type_name of a using_alias_directive is resolved as if the immediately containing compilation unit or namespace body had no using_directives but has the correct set of extern_alias_directives.

Example: In the following code
namespace N1.N2 {}

namespace N3
{
    extern alias X;

    using R1 = X::N; // OK
    using R2 = N1; // OK
    using R3 = N1.N2; // OK
    using R4 = R2.N2; // Error, R2 unknown
}
the last using_alias_directive results in a compile-time error because it is not affected by the previous using_alias_directive. The first using_alias_directive does not result in an error since the scope of the extern alias X includes the using_alias_directive.

end example

A using_alias_directive can create an alias for any namespace or type, including the namespace within which it appears and any namespace or type nested within that namespace.

Accessing a namespace or type through an alias yields exactly the same result as accessing that namespace or type through its declared name.

Example: Given
namespace N1.N2
{
    class A {}
}

namespace N3
{
    using R1 = N1;
    using R2 = N1.N2;

    class B
    {
        N1.N2.A a; // refers to N1.N2.A
        R1.N2.A b; // refers to N1.N2.A
        R2.A c; // refers to N1.N2.A
    }
}
the names N1.N2.A, R1.N2.A, and R2.A are equivalent and all refer to the class declaration whose fully qualified name is N1.N2.A.

end example

Although each part of a partial type (§15.2.7) is declared within the same namespace, the parts are typically written within different namespace declarations. Thus, different extern_alias_directives and using_directives can be present for each part. When interpreting simple names (§12.8.4) within one part, only the extern_alias_directives and using_directives of the namespace bodies and compilation unit enclosing that part are considered. This may result in the same identifier having different meanings in different parts.

Example:

namespace N
{
    using List = System.Collections.ArrayList;

    partial class A
    {
        List x; // x has type System.Collections.ArrayList
    }
}

namespace N
{
    using List = Widgets.LinkedList;

    partial class A
    {
        List y; // y has type Widgets.LinkedList
    }
}

end example

Using aliases can name a closed constructed type, but cannot name an unbound generic type declaration without supplying type arguments.

Example:

namespace N1
{
    class A<T>
    {
        class B {}
    }
}

namespace N2
{
    using W = N1.A;       // Error, cannot name unbound generic type
    using X = N1.A.B;     // Error, cannot name unbound generic type
    using Y = N1.A<int>;  // Ok, can name closed constructed type
    using Z<T> = N1.A<T>; // Error, using alias cannot have type parameters
}

end example

14.5.3 Using namespace directives

A using_namespace_directive imports the types contained in a namespace into the immediately enclosing compilation unit or namespace body, enabling the identifier of each type to be used without qualification.

using_namespace_directive
    : 'using' namespace_name ';'
    ;

Within member declarations in a compilation unit or namespace body that contains a using_namespace_directive, the types contained in the given namespace can be referenced directly.

Example:
namespace N1.N2
{
    class A {}
}

namespace N3
{
    using N1.N2;

    class B : A {}
}
Above, within member declarations in the N3 namespace, the type members of N1.N2 are directly available, and thus class N3.B derives from class N1.N2.A.

end example

A using_namespace_directive imports the types contained in the given namespace, but specifically does not import nested namespaces.

Example: In the following code
namespace N1.N2
{
    class A {}
}

namespace N3
{
    using N1;
    class B : N2.A {} // Error, N2 unknown
}
the using_namespace_directive imports the types contained in N1, but not the namespaces nested in N1. Thus, the reference to N2.A in the declaration of B results in a compile-time error because no members named N2 are in scope.

end example

Unlike a using_alias_directive, a using_namespace_directive may import types whose identifiers are already defined within the enclosing compilation unit or namespace body. In effect, names imported by a using_namespace_directive are hidden by similarly named members in the enclosing compilation unit or namespace body.

Example:
namespace N1.N2
{
    class A {}
    class B {}
}

namespace N3
{
    using N1.N2;
    class A {}
}
Here, within member declarations in the N3 namespace, A refers to N3.A rather than N1.N2.A.

end example

Because names may be ambiguous when more than one imported namespace introduces the same type name, a using_alias_directive is useful to disambiguate the reference.

Example: In the following code
namespace N1
{
    class A {}
}

namespace N2
{
    class A {}
}

namespace N3
{
    using N1;
    using N2;

    class B : A {} // Error, A is ambiguous
}
both N1 and N2 contain a member A, and because N3 imports both, referencing A in N3 is a compile-time error. In this situation, the conflict can be resolved either through qualification of references to A, or by introducing a using_alias_directive that picks a particular A. For example:
namespace N3
{
    using N1;
    using N2;
    using A = N1.A;

    class B : A {} // A means N1.A
}
end example

Furthermore, when more than one namespace or type imported by using_namespace_directives or using_static_directives in the same compilation unit or namespace body contain types or members by the same name, references to that name as a simple_name are considered ambiguous.

Example:
namespace N1
{
    class A {}
}

class C
{
    public static int A;
}

namespace N2
{
    using N1;
    using static C;

    class B
    {
        void M()
        {
            A a = new A();   // Ok, A is unambiguous as a type-name
            A.Equals(2);     // Error, A is ambiguous as a simple-name
        }
    }
}
N1 contains a type member A, and C contains a static field A, and because N2 imports both, referencing A as a simple_name is ambiguous and a compile-time error.

end example

Like a using_alias_directive, a using_namespace_directive does not contribute any new members to the underlying declaration space of the compilation unit or namespace, but, rather, affects only the compilation unit or namespace body in which it appears.

The namespace_name referenced by a using_namespace_directive is resolved in the same way as the namespace_or_type_name referenced by a using_alias_directive. Thus, using_namespace_directives in the same compilation unit or namespace body do not affect each other and can be written in any order.

14.5.4 Using static directives

A using_static_directive imports the nested types and static members contained directly in a type declaration into the immediately enclosing compilation unit or namespace body, enabling the identifier of each member and type to be used without qualification.

using_static_directive
    : 'using' 'static' type_name ';'
    ;

Within member declarations in a compilation unit or namespace body that contains a using_static_directive, the accessible nested types and static members (except extension methods) contained directly in the declaration of the given type can be referenced directly.

Example:
namespace N1
{
   class A 
   {
        public class B {}
        public static B M() => new B();
   }
}

namespace N2
{
    using static N1.A;

    class C
    {
        void N()
        {
            B b = M();
        }
    }
}
In the preceding code, within member declarations in the N2 namespace, the static members and nested types of N1.A are directly available, and thus the method N is able to reference both the B and M members of N1.A.

end example

A using_static_directive specifically does not import extension methods directly as static methods, but makes them available for extension method invocation (§12.8.9.3).

Example:
namespace N1 
{
    static class A 
    {
        public static void M(this string s){}
    }
}

namespace N2
{
    using static N1.A;

    class B
    {
        void N()
        {
            M("A");      // Error, M unknown
            "B".M();     // Ok, M known as extension method
            N1.A.M("C"); // Ok, fully qualified
        }
    }
}
the using_static_directive imports the extension method M contained in N1.A, but only as an extension method. Thus, the first reference to M in the body of B.N results in a compile-time error because no members named M are in scope.

end example

A using_static_directive only imports members and types declared directly in the given type, not members and types declared in base classes.

Example:
namespace N1 
{
    class A 
    {
        public static void M(string s){}
    }

    class B : A
    {
        public static void M2(string s){}
    }
}

namespace N2
{
    using static N1.B;

    class C
    {
        void N()
        {
            M2("B");      // OK, calls B.M2
            M("C");       // Error. M unknown 
        }
    }
}
the using_static_directive imports the method M2 contained in N1.B, but does not import the method M contained in N1.A. Thus, the reference to M in the body of C.N results in a compile-time error because no members named M are in scope. Developers must add a second using static directive to specify that the methods in N1.A should also be imported.

end example

Ambiguities between multiple using_namespace_directives and using_static_directives are discussed in §14.5.3.

14.6 Namespace member declarations

A namespace_member_declaration is either a namespace_declaration (§14.3) or a type_declaration (§14.7).

namespace_member_declaration
    : namespace_declaration
    | type_declaration
    ;

A compilation unit or a namespace body can contain namespace_member_declarations, and such declarations contribute new members to the underlying declaration space of the containing compilation unit or namespace body.

14.7 Type declarations

A type_declaration is a class_declaration (§15.2), a struct_declaration (§16.2), an interface_declaration (§18.2), an enum_declaration (§19.2), or a delegate_declaration (§20.2).

type_declaration
    : class_declaration
    | struct_declaration
    | interface_declaration
    | enum_declaration
    | delegate_declaration
    ;

A type_declaration can occur as a top-level declaration in a compilation unit or as a member declaration within a namespace, class, or struct.

When a type declaration for a type T occurs as a top-level declaration in a compilation unit, the fully qualified name (§7.8.2) of the type declaration is the same as the unqualified name of the declaration (§7.8.2). When a type declaration for a type T occurs within a namespace, class, or struct declaration, the fully qualified name (§7.8.3) of the type declarationis S.N, where S is the fully qualified name of the containing namespace, class, or struct declaration, and N is the unqualified name of the declaration.

A type declared within a class or struct is called a nested type (§15.3.9).

The permitted access modifiers and the default access for a type declaration depend on the context in which the declaration takes place (§7.5.2):

Types declared in compilation units or namespaces can have public or internal access. The default is internal access.
Types declared in classes can have public, protected internal, protected, private protected, internal, or private access. The default is private access.
Types declared in structs can have public, internal, or private access. The default is private access.

14.8 Qualified alias member

14.8.1 General

The namespace alias qualifier :: makes it possible to guarantee that type name lookups are unaffected by the introduction of new types and members. The namespace alias qualifier always appears between two identifiers referred to as the left-hand and right-hand identifiers. Unlike the regular . qualifier, the left-hand identifier of the :: qualifier is looked up only as an extern or using alias.

A qualified_alias_member provides explicit access to the global namespace and to extern or using aliases that are potentially hidden by other entities.

qualified_alias_member
    : identifier '::' identifier type_argument_list?
    ;

A qualified_alias_member can be used as a namespace_or_type_name (§7.8) or as the left operand in a member_access (§12.8.7).

A qualified_alias_member consists of two identifiers, referred to as the left-hand and right-hand identifiers, seperated by the :: token and optionally followed by a type_argument_list. When the left-hand identifier is global then the global namespace is searched for the right-hand identifier. For any other left-hand identifier, that identifier is looked up as an extern or using alias (§14.4 and §14.5.2). A compile-time error occurs if there is no such alias or the alias references a type. If the alias references a namespace then that namespace is searched for the right-hand identifier.

A qualified_alias_member has one of two forms:

N::I<A₁, ..., Aₑ>, where N and I represent identifiers, and <A₁, ..., Aₑ> is a type argument list. (e is always at least one.)
N::I, where N and I represent identifiers. (In this case, e is considered to be zero.)

Using this notation, the meaning of a qualified_alias_member is determined as follows:

If N is the identifier global, then the global namespace is searched for I:
- If the global namespace contains a namespace named I and e is zero, then the qualified_alias_member refers to that namespace.
- Otherwise, if the global namespace contains a non-generic type named I and e is zero, then the qualified_alias_member refers to that type.
- Otherwise, if the global namespace contains a type named I that has e type parameters, then the qualified_alias_member refers to that type constructed with the given type arguments.
- Otherwise, the qualified_alias_member is undefined and a compile-time error occurs.
Otherwise, starting with the namespace declaration (§14.3) immediately containing the qualified_alias_member (if any), continuing with each enclosing namespace declaration (if any), and ending with the compilation unit containing the qualified_alias_member, the following steps are evaluated until an entity is located:
- If the namespace declaration or compilation unit contains a using_alias_directive that associates N with a type, then the qualified_alias_member is undefined and a compile-time error occurs.
- Otherwise, if the namespace declaration or compilation unit contains an extern_alias_directive or using_alias_directive that associates N with a namespace, then:
  - If the namespace associated with N contains a namespace named I and e is zero, then the qualified_alias_member refers to that namespace.
  - Otherwise, if the namespace associated with N contains a non-generic type named I and e is zero, then the qualified_alias_member refers to that type.
  - Otherwise, if the namespace associated with N contains a type named I that has e type parameters, then the qualified_alias_member refers to that type constructed with the given type arguments.
  - Otherwise, the qualified_alias_member is undefined and a compile-time error occurs.
Otherwise, the qualified_alias_member is undefined and a compile-time error occurs.

Example: In the code:
using S = System.Net.Sockets;

class A
{
    public static int x;
}

class C
{
    public void F(int A, object S)
    {
        // Use global::A.x instead of A.x
        global::A.x += A;
        // Use S::Socket instead of S.Socket
        S::Socket s = S as S::Socket;
    }
}
the class A is referenced with global::A and the type System.Net.Sockets.Socket is referenced with S::Socket. Using A.x and S.Socket instead would have caused compile-time errors because A and S would have resolved to the parameters.

end example

Note: The identifier global has special meaning only when used as the left-hand identifier of a qualified_alias_name. It is not a keyword and it is not itself an alias; it is a contextual keyword (§6.4.4). In the code:
class A { }

class C
{
    global.A x; // Error: global is not defined
    global::A y; // Valid: References A in the global namespace
}
using global.A causes a compile-time error since there is no entity named global in scope. If some entity named global were in scope, then global in global.A would have resolved to that entity.

Using global as the left-hand identifier of a qualified_alias_member always causes a lookup in the global namespace, even if there is a using alias named global. In the code:
using global = MyGlobalTypes;

class A { }

class C 
{
    global.A x; // Valid: References MyGlobalTypes.A
    global::A y; // Valid: References A in the global namespace
}
global.A resolves to MyGlobalTypes.A and global::A resolves to class A in the global namespace.

end note

14.8.2 Uniqueness of aliases

Each compilation unit and namespace body has a separate declaration space for extern aliases and using aliases. Thus, while the name of an extern alias or using alias shall be unique within the set of extern aliases and using aliases declared in the immediately containing compilation unit or namespace body, an alias is permitted to have the same name as a type or namespace as long as it is used only with the :: qualifier.

Example: In the following:
namespace N
{
    public class A {}
    public class B {}
}

namespace N
{
    using A = System.IO;

    class X
    {
        A.Stream s1; // Error, A is ambiguous
        A::Stream s2; // Ok
    }
}
the name A has two possible meanings in the second namespace body because both the class A and the using alias A are in scope. For this reason, use of A in the qualified name A.Stream is ambiguous and causes a compile-time error to occur. However, use of A with the :: qualifier is not an error because A is looked up only as a namespace alias.

end example

Share via

14 Namespaces

14.1 General

14.2 Compilation units

14.3 Namespace declarations

14.4 Extern alias directives

14.5 Using directives

14.5.1 General

14.5.2 Using alias directives

14.5.3 Using namespace directives

14.5.4 Using static directives

14.6 Namespace member declarations

14.7 Type declarations

14.8 Qualified alias member

14.8.1 General

14.8.2 Uniqueness of aliases

Feedback

Additional resources