Edit

Share via

SignTool

  • Article

SignTool is a command-line tool that digitally signs files, verifies the signatures in files, and time stamps files. For information about why signing files is important, see Introduction to code signing.

The tool is installed in the \Bin folder of the Microsoft Windows Software Development Kit (SDK) installation path, for example: C:\Program Files (x86)\Windows Kits\10\bin\10.0.19041.0\x64\signtool.exe.

SignTool is available as part of the Windows SDK, which you can download from Windows SDK.

Note

The Windows 10 SDK, Windows 10 HLK, Windows 10 WDK, and Windows 10 ADK builds 20236 and later require that you specify the digest algorithm. The SignTool sign command requires the file digest algorithm option (/fd) and the time stamp digest algorithm option (/td) during signing and time stamping, respectively.

If /fd isn't specified during signing and if /td isn't specified during time stamping, the command throws a warning, error code 0, initially. In later versions of SignTool, the warning becomes an error. We recommend SHA256. It is considered to be more secure than SHA1 by the industry.

Syntax

signtool [command] [options] [file_name | ...]

Parameters

Argument Description
command One of four commands that specifies an operation to perform on a file: catdb, sign, timestamp, or verify. For a description of each command, see the next table.
options An option that modifies a command. In addition to the global /q and /v options, each command supports a unique set of options.
file_name The path to a file to sign.

SignTool supports the following commands:

Command Description
catdb Adds a catalog file to, or removes it from, a catalog database. Catalog databases are used for automatic lookup of catalog files and are identified by GUID. For a list of the options supported by the catdb command, see catdb command options.
sign Digitally signs files. Digital signatures protect files from tampering and enable users to verify the signer based on a signing certificate. For a list of the options supported by the sign command, see sign command options.
timestamp Time stamps files. For a list of the options supported by the timestamp command, see timestamp command options.
verify Verifies the digital signature of files. Determines whether the signing certificate was issued by a trusted authority, whether the signing certificate has been revoked, and, optionally, whether the signing certificate is valid for a specific policy. For a list of the options supported by the verify command, see verify command options.

The following options apply to all SignTool commands.

Global option Description
/q Displays no output if the command runs successfully, and displays minimal output if the command fails.
/v Displays verbose output regardless of whether the command runs successfully or fails, and displays warning messages.
/debug Displays debugging information.

Catdb command options

The following table lists the options that can be used with the catdb command.

Catdb option Description
/d Specifies that the default catalog database is updated. If you don't use either /d or /g, SignTool updates the system component and driver database.
/g GUID Specifies that the catalog database identified by the GUID is updated.
/r Removes the specified catalog from the catalog database. If this option isn't specified, SignTool adds the specified catalog to the catalog database.
/u Specifies that a unique name is automatically generated for the added catalog files. If necessary, the catalog files are renamed to prevent name conflicts with existing catalog files. If this option isn't specified, SignTool overwrites any existing catalog that has the same name as the specified catalog.

Note

Catalog databases are used for automatic lookup of catalog files.

Sign command options

The following table lists the options that can be used with the sign command.

Sign command option Description
/a Automatically selects the best signing certificate. SignTool finds all valid certificates that satisfy all specified conditions and selects the one that is valid for the longest time. If this option isn't present, SignTool expects to find only one valid signing certificate.
/ac file Adds another certificate from file to the signature block.
/as Appends this signature. If no primary signature exists, this signature is made the primary signature instead.
/c CertTemplateName Specifies the Certificate Template Name (a Microsoft extension) for the signing certificate.
/csp CSPName Specifies the cryptographic service provider (CSP) that contains the private key container.
/d Desc Specifies a description of the signed content.
/dg Path Generates the digest to be signed and the unsigned PKCS7 files. The output digest and PKCS7 files are <Path>\<FileName>.dig and <Path>\<FileName>.p7u. To output an extra XML file, use /dxml.
/di Path Creates the signature by ingesting the signed digest to the unsigned PKCS7 file. The input signed digest and unsigned PKCS7 files should be <Path>\<FileName>.dig.signed and <Path>\<FileName>.p7u.
/dlib DLL Specifies the DLL that implements the AuthenticodeDigestSign function to sign the digest with. This option is equivalent to using SignTool separately with the /dg, /ds, and /di options. This option invokes all three as one atomic operation.
/dmdf Filename When used with the /dg option, passes the file’s contents to the AuthenticodeDigestSign function without modification.
/ds Signs the digest only. The input file should be the digest generated by the /dg option. The output file is: <File>.signed.
/du URL Specifies a Uniform Resource Locator (URL) for the expanded description of the signed content.
/dxml When used with the /dg option, produces an XML file. The output file is: <Path>\<FileName>.dig.xml.
/f SignCertFile Specifies the signing certificate in a file. If the file is in Personal Information Exchange (PFX) format and protected by a password, use the /p option to specify the password. If the file doesn't contain private keys, use the /csp and /kc options to specify the CSP and private key container name.
/fd alg Specifies the file digest algorithm to use for creating file signatures. Note: If the /fd option isn't specified while signing, the command generates an error.
/fd certHash Specifying the string "certHash" causes the command to use the algorithm specified on the signing certificate. Note: If the /fd option isn't specified while signing, the command generates an error.
/i IssuerName Specifies the name of the issuer of the signing certificate. This value can be a substring of the entire issuer name.
/kc PrivKeyContainerName Specifies the private key container name.
/n SubjectName Specifies the name of the subject of the signing certificate. This value can be a substring of the entire subject name.
/nph If supported, suppresses page hashes for executable files. The default is determined by the SIGNTOOL_PAGE_HASHES environment variable and by the wintrust.dll version. This option is ignored for non-PE files.
/p Password Specifies the password to use when opening a PFX file. Use the /f option to specify a PFX file.
/p7 Path Specifies that a Public Key Cryptography Standards (PKCS) #7 file is produced for each specified content file. PKCS #7 files are named <path>\<filename>.p7.
/p7ce Value Specifies options for the signed PKCS #7 content. Set Value to Embedded to embed the signed content in the PKCS #7 file, or to DetachedSignedData to produce the signed data portion of a detached PKCS #7 file. If the /p7ce option isn't specified, the signed content is embedded by default.
/p7co <OID> Specifies the object identifier (OID) that identifies the signed PKCS #7 content.
/ph If supported, generates page hashes for executable files.
/r RootSubjectName Specifies the name of the subject of the root certificate that the signing certificate must chain to. This value can be a substring of the entire subject name of the root certificate.
/s StoreName Specifies the store to open when the command searches for the certificate. If this option isn't specified, the command opens the My store.
/sha1 Hash Specifies the SHA1 hash of the signing certificate. The SHA1 hash is commonly used when multiple certificates satisfy the criteria specified by the remaining options.
/sm Specifies that the command uses a machine store, instead of a user store.
/t URL Specifies the URL of the time stamp server. If this option or /tr isn't specified, the signed file isn't time stamped. If time stamping fails, the command generates a warning. This option can't be used with the /tr option.
/td alg Used with the /tr option to request a digest algorithm used by the RFC 3161 time stamp server. Note: If /td isn't specified while time stamping, the command generates an error.
/tr URL Specifies the URL of the RFC 3161 time stamp server. If this option or /t isn't specified, the signed file isn't time stamped. If the time stamping fails, the command generates a warning. This option can't be used with the /t option.
/u Usage Specifies the enhanced key usage (EKU) that must be present in the signing certificate. The usage value can be specified by OID or string. The default usage is Code Signing or 1.3.6.1.5.5.7.3.3.
/uw Specifies usage of Windows System Component Verification or 1.3.6.1.4.1.311.10.3.6.

For usage examples, see Using SignTool to Sign a File.

Timestamp command options

The following table lists the options that can be used with the timestamp command.

Timestamp option Description
/p7 Time stamps PKCS #7 files.
/t URL Specifies the URL of the time stamp server. The file being time stamped must have previously been signed. Either the /t or the /tr option is required.
/td alg Used with the /tr option to request a digest algorithm used by the RFC 3161 time stamp server. Note: If /td isn't specified while time stamping, the command generates a warning.
/tp index Time stamps the signature at index.
/tr URL Specifies the URL of the RFC 3161 time stamp server. The file being time stamped must have previously been signed. Either the /tr or the /t option is required.

Verify command options

Verify option Description
/a Specifies that all methods can be used to verify the file. First, SignTool searches the catalog databases to determine whether the file is signed in a catalog. If the file isn't signed in any catalog, SignTool attempts to verify the file's embedded signature. We recommend this option when verifying files that might or might not be signed in a catalog. Examples of files that might or might not be signed include Windows files or drivers.
/ad Finds the catalog by using the default catalog database.
/all Verifies all signatures in a file with multiple signatures.
/as Finds the catalog by using the system component (driver) catalog database.
/ag CatDBGUID Finds the catalog in the catalog database identified by the GUID.
/c CatFile Specifies the catalog file by name.
/d Prints the description and description URL. Windows Vista and earlier: This option isn't supported.
/ds Index Verifies the signature at a certain position.
/hash{SHA1|SHA256} Specifies an optional hash algorithm to use when searching for a file in a catalog.
/kp Performs the verification by using the x64 kernel-mode driver signing policy.
/ms Uses multiple verification semantics. This behavior is the default of a WinVerifyTrust call.
/o Version Verifies the file by operating system version. The version parameter is of the form: <PlatformID>:<VerMajor>.<VerMinor>.<BuildNumber>. We recommend the use of the /o option. If /o isn't specified, SignTool might return unexpected results. For example, if you don't include /o, then system catalogs that validate correctly on an older operating system might not validate correctly on a newer operating system.
/p7 Verifies PKCS #7 files. No existing policies are used for PKCS #7 validation. SignTool checks the signature and builds a chain for the signing certificate.
/pa Specifies that the Default Authentication Verification Policy is used. If the /pa option isn't specified, SignTool uses the Windows Driver Verification Policy. This option can't be used with the catdb options.
/pg PolicyGUID Specifies a verification policy by GUID. The GUID corresponds to the ActionID of the verification policy. This option can't be used with the catdb options.
/ph Print and verify page hash values. Windows Vista and earlier: This option isn't supported.
/r RootSubjectName Specifies the name of the subject of the root certificate that the signing certificate must chain to. This value can be a substring of the entire subject name of the root certificate.
/tw Specifies that the command generates a warning if the signature isn't time stamped.

The SignTool verify command determines whether the signing certificate was issued by a trusted authority, whether the signing certificate has been revoked, and, optionally, whether the signing certificate is valid for a specific policy.

The SignTool verify command outputs the embedded signature status unless an option is specified to search a catalog, such as /a, /ad, /as, /ag, or /c.

Return value

SignTool returns one of the following exit codes when it terminates.

Exit code Description
0 Execution was successful.
1 Execution has failed.
2 Execution has completed with warnings.

Examples

The following command adds the catalog file MyCatalogFileName.cat to the system component and driver database. The /u option generates a unique name if necessary to prevent replacing an existing catalog file named MyCatalogFileName.cat.

signtool catdb /v /u MyCatalogFileName.cat

The following command signs a file automatically by using the best certificate.

signtool sign /a /fd SHA256 MyFile.exe

The following command digitally signs a file by using a certificate stored in a password-protected PFX file.

signtool sign /f MyCert.pfx /p MyPassword /fd SHA256 MyFile.exe

The following command digitally signs and time stamps a file. The certificate used to sign the file is stored in a PFX file.

signtool sign /f MyCert.pfx /t http://timestamp.digicert.com /fd SHA256 MyFile.exe

The following command signs a file by using a certificate located in the My store that has a subject name of My Company Certificate.

signtool sign /n "My Company Certificate" /fd SHA256 MyFile.exe

The following command signs an ActiveX control and provides information that is displayed in a browser when the user is prompted to install the control.

signtool sign /f MyCert.pfx /d: "MyControl" /du http://www.example.com/MyControl/info.html /fd SHA256 MyControl.exe

The following command time stamps a file that has already been digitally signed.

signtool timestamp /t http://timestamp.digicert.com MyFile.exe

The following command time stamps a file using an RFC 3161 time stamp server.

signtool timestamp /tr http://timestamp.digicert.com /td SHA256 MyFile.exe

The following command verifies that a file has been signed.

signtool verify MyFile.exe

The following command verifies a system file that can be signed in a catalog.

signtool verify /a SystemFile.dll

The following command verifies a system file that is signed in a catalog named MyCatalog.cat.

signtool verify /c MyCatalog.cat SystemFile.dll