Use Azure Container Storage Preview with Azure managed disks

Article
06/19/2024

Azure Container Storage is a cloud-based volume management, deployment, and orchestration service built natively for containers. This article shows you how to configure Azure Container Storage to use Azure managed disks as back-end storage for your Kubernetes workloads. At the end, you'll have a pod that's using Azure managed disks as its storage.

Prerequisites

If you don't have an Azure subscription, create a free account before you begin.
This article requires the latest version (2.35.0 or later) of the Azure CLI. See How to install the Azure CLI. If you're using the Bash environment in Azure Cloud Shell, the latest version is already installed. If you plan to run the commands locally instead of in Azure Cloud Shell, be sure to run them with administrative privileges. For more information, see Get started with Azure Cloud Shell.
You'll need the Kubernetes command-line client, kubectl. It's already installed if you're using Azure Cloud Shell, or you can install it locally by running the az aks install-cli command.
If you haven't already installed Azure Container Storage, follow the instructions in Use Azure Container Storage with Azure Kubernetes Service.
Check if your target region is supported in Azure Container Storage regions.

Note

To use Azure Container Storage with Azure managed disks, your AKS cluster should have a node pool of at least three general purpose VMs such as standard_d4s_v5 for the cluster nodes, each with a minimum of four virtual CPUs (vCPUs).

Create and attach persistent volumes

Follow these steps to create and attach a persistent volume.

1. Create a storage pool

First, create a storage pool, which is a logical grouping of storage for your Kubernetes cluster, by defining it in a YAML manifest file.

You have the following options for creating a storage pool:

Create a dynamic storage pool
Create a pre-provisioned storage pool using pre-provisioned Azure managed disks
Create a dynamic storage pool using your own encryption key (optional)

If you enabled Azure Container Storage using az aks create or az aks update commands, you might already have a storage pool. Use kubectl get sp -n acstor to get the list of storage pools. If you have a storage pool already available that you want to use, you can skip this step and proceed to Display the available storage classes.

Create a dynamic storage pool

Follow these steps to create a dynamic storage pool for Azure Disks.

Use your favorite text editor to create a YAML manifest file such as code acstor-storagepool.yaml.
Paste in the following code. The storage pool name value can be whatever you want. For skuName, specify the level of performance and redundancy. Acceptable values are Premium_LRS, Standard_LRS, StandardSSD_LRS, UltraSSD_LRS, Premium_ZRS, PremiumV2_LRS, and StandardSSD_ZRS. For storage, specify the amount of storage capacity for the pool in Gi or Ti. Save the file.
```
apiVersion: containerstorage.azure.com/v1
kind: StoragePool
metadata:
  name: azuredisk
  namespace: acstor
spec:
  poolType:
    azureDisk:
      skuName: Premium_LRS
  resources:
    requests:
      storage: 1Ti
```
Apply the YAML manifest file to create the storage pool.
```
kubectl apply -f acstor-storagepool.yaml 
```
When storage pool creation is complete, you'll see a message like:
```
storagepool.containerstorage.azure.com/azuredisk created
```
You can also run this command to check the status of the storage pool. Replace <storage-pool-name> with your storage pool name value. For this example, the value would be azuredisk.
```
kubectl describe sp <storage-pool-name> -n acstor
```

When the storage pool is created, Azure Container Storage will create a storage class on your behalf, using the naming convention acstor-<storage-pool-name>. Now you can display the available storage classes and create a persistent volume claim.

Create a pre-provisioned storage pool

If you have Azure managed disks that are already provisioned, you can create a pre-provisioned storage pool using those disks. Because the disks are already provisioned, you don't need to specify the skuName or storage capacity when creating the storage pool.

Follow these steps to create a pre-provisioned storage pool for Azure Disks.

Sign in to the Azure portal.
For each disk that you want to use, navigate to the Azure managed disk and select Settings > Properties. Copy the entire string under Resource ID and put it in a text file.
Use your favorite text editor to create a YAML manifest file such as code acstor-storagepool.yaml.

Paste in the following code. The storage pool name value can be whatever you want. Replace <resource-id> with the resource ID of each managed disk. Save the file.

apiVersion: containerstorage.azure.com/v1
kind: StoragePool
metadata:
  name: sp-preprovisioned
  namespace: acstor
spec:
  poolType:
    azureDisk:
      disks:
        - reference <resource-id1>
        - reference <resource-id2>

Apply the YAML manifest file to create the storage pool.
```
kubectl apply -f acstor-storagepool.yaml 
```
When storage pool creation is complete, you'll see a message like:
```
storagepool.containerstorage.azure.com/sp-preprovisioned created
```
You can also run this command to check the status of the storage pool. Replace <storage-pool-name> with your storage pool name value. For this example, the value would be sp-preprovisioned.
```
kubectl describe sp <storage-pool-name> -n acstor
```

Create a dynamic storage pool using your own encryption key (optional)

All data in an Azure storage account is encrypted at rest. By default, data is encrypted with Microsoft-managed keys. For more control over encryption keys, you can supply customer-managed keys (CMK) when you create your storage pool to encrypt the persistent volumes that you'll create.

To use your own key for server-side encryption, you must have an Azure Key Vault with a key. The Key Vault should have purge protection enabled, and it must use the Azure RBAC permission model. Learn more about customer-managed keys on Linux.

When creating your storage pool, you must define the CMK parameters. The required CMK encryption parameters are:

keyVersion specifies the version of the key to use
keyName is the name of your key
keyVaultUri is the uniform resource identifier of the Azure Key Vault, for example https://user.vault.azure.net
Identity specifies a managed identity with access to the vault, for example /subscriptions/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/resourcegroups/MC_user-acstor-westus2-rg_user-acstor-westus2_westus2/providers/Microsoft.ManagedIdentity/userAssignedIdentities/user-acstor-westus2-agentpool

Follow these steps to create a storage pool using your own encryption key. All persistent volumes created from this storage pool will be encrypted using the same key.

Use your favorite text editor to create a YAML manifest file such as code acstor-storagepool-cmk.yaml.
Paste in the following code, supply the required parameters, and save the file. The storage pool name value can be whatever you want. For skuName, specify the level of performance and redundancy. Acceptable values are Premium_LRS, Standard_LRS, StandardSSD_LRS, UltraSSD_LRS, Premium_ZRS, PremiumV2_LRS, and StandardSSD_ZRS. For storage, specify the amount of storage capacity for the pool in Gi or Ti. Be sure to supply the CMK encryption parameters.
```
apiVersion: containerstorage.azure.com/v1
kind: StoragePool
metadata:
  name: azuredisk
  namespace: acstor
spec:
  poolType:
    azureDisk:
      skuName: Premium_LRS
      encryption: {
        keyVersion: "<key-version>",
        keyName: "<key-name>",
        keyVaultUri: "<key-vault-uri>",
        identity: "<identity>"
      }
  resources:
    requests:
      storage: 1Ti
```
Apply the YAML manifest file to create the storage pool.
```
kubectl apply -f acstor-storagepool-cmk.yaml 
```
When storage pool creation is complete, you'll see a message like:
```
storagepool.containerstorage.azure.com/azuredisk created
```
You can also run this command to check the status of the storage pool. Replace <storage-pool-name> with your storage pool name value. For this example, the value would be azuredisk.
```
kubectl describe sp <storage-pool-name> -n acstor
```

When the storage pool is created, Azure Container Storage will create a storage class on your behalf, using the naming convention acstor-<storage-pool-name>.

2. Display the available storage classes

When the storage pool is ready to use, you must select a storage class to define how storage is dynamically created when creating persistent volume claims and deploying persistent volumes.

Run kubectl get sc to display the available storage classes. You should see a storage class called acstor-<storage-pool-name>.

Important

Don't use the storage class that's marked internal. It's an internal storage class that's needed for Azure Container Storage to work.

3. Create a persistent volume claim

A persistent volume claim (PVC) is used to automatically provision storage based on a storage class. Follow these steps to create a PVC using the new storage class.

Use your favorite text editor to create a YAML manifest file such as code acstor-pvc.yaml.

Paste in the following code and save the file. The PVC name value can be whatever you want.

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: azurediskpvc
spec:
  accessModes:
    - ReadWriteOnce
  storageClassName: acstor-azuredisk # replace with the name of your storage class if different
  resources:
    requests:
      storage: 100Gi

Apply the YAML manifest file to create the PVC.
```
kubectl apply -f acstor-pvc.yaml
```
You should see output similar to:
```
persistentvolumeclaim/azurediskpvc created
```
You can verify the status of the PVC by running the following command:
```
kubectl describe pvc azurediskpvc
```

Once the PVC is created, it's ready for use by a pod.

4. Deploy a pod and attach a persistent volume

Create a pod using Fio (Flexible I/O Tester) for benchmarking and workload simulation, and specify a mount path for the persistent volume. For claimName, use the name value that you used when creating the persistent volume claim.

Use your favorite text editor to create a YAML manifest file such as code acstor-pod.yaml.

Paste in the following code and save the file.

kind: Pod
apiVersion: v1
metadata:
  name: fiopod
spec:
  nodeSelector:
    acstor.azure.com/io-engine: acstor
  volumes:
    - name: azurediskpv
      persistentVolumeClaim:
        claimName: azurediskpvc
  containers:
    - name: fio
      image: nixery.dev/shell/fio
      args:
        - sleep
        - "1000000"
      volumeMounts:
        - mountPath: "/volume"
          name: azurediskpv

Apply the YAML manifest file to deploy the pod.
```
kubectl apply -f acstor-pod.yaml
```
You should see output similar to the following:
```
pod/fiopod created
```
Check that the pod is running and that the persistent volume claim has been bound successfully to the pod:
```
kubectl describe pod fiopod
kubectl describe pvc azurediskpvc
```

Check fio testing to see its current status:

kubectl exec -it fiopod -- fio --name=benchtest --size=800m --filename=/volume/test --direct=1 --rw=randrw --ioengine=libaio --bs=4k --iodepth=16 --numjobs=8 --time_based --runtime=60

You've now deployed a pod that's using Azure Disks as its storage, and you can use it for your Kubernetes workloads.

Manage persistent volumes and storage pools

Now that you've created a persistent volume, you can detach and reattach it as needed. You can also expand or delete a storage pool.

Detach and reattach a persistent volume

To detach a persistent volume, delete the pod that the persistent volume is attached to. Replace <pod-name> with the name of the pod, for example fiopod.

kubectl delete pods <pod-name>

To reattach a persistent volume, simply reference the persistent volume claim name in the YAML manifest file as described in Deploy a pod and attach a persistent volume.

To check which persistent volume a persistent volume claim is bound to, run kubectl get pvc <persistent-volume-claim-name>.

Expand a storage pool

You can expand storage pools backed by Azure Disks to scale up quickly and without downtime. Shrinking storage pools isn't currently supported.

Note

Expanding a storage pool can increase your costs for Azure Container Storage and Azure Disks. See the Azure Container Storage pricing page.

Follow these instructions to expand an existing storage pool for Azure Disks.

Using a text editor, open the YAML manifest file that you used to create the storage pool, for example code acstor-storagepool.yaml.
Replace the specified storage entry in the YAML manifest file with the desired value. This value must be greater than the current capacity of the storage pool. For example, if the spec is set to storage: 1Ti, change it to storage: 2Ti. If you created a pre-provisioned storage pool, there won't be a storage entry because the storage pool inherited the capacity size from the pre-provisioned Azure Disks. If you don't see a storage entry in the YAML, add the following code specifying the desired storage capacity and then save the manifest file:
```
spec:
  resources:
    requests:
      storage: 2Ti
```
Apply the YAML manifest file to expand the storage pool.
```
kubectl apply -f acstor-storagepool.yaml 
```
Run this command to check the status of the storage pool. Replace <storage-pool-name> with your storage pool name value.
```
kubectl describe sp <storage-pool-name> -n acstor
```
You should see a message like "the storage pool is expanding." Run the command again after a few minutes and the message should be gone.
Run kubectl get sp -A and the storage pool should reflect the new size.

Delete a storage pool

If you want to delete a storage pool, run the following command. Replace <storage-pool-name> with the storage pool name.

kubectl delete sp -n acstor <storage-pool-name>

Share via