Edit

Share via

Site-to-site IPsec policies

  • Article

This article shows the supported IPsec policy combinations.

Default IPsec policies

Note

When working with Default policies, Azure can act as both initiator and responder during an IPsec tunnel setup. While Virtual WAN VPN supports many algorithm combinations, our recommendation is GCMAES256 for both IPSEC Encryption and Integrity for optimal performance. AES256 and SHA256 are considered less performant and therefore performance degradation such as latency and packet drops can be expected for similar algorithm types. For more information about Virtual WAN, see the Azure Virtual WAN FAQ.

Initiator

The following sections list the supported policy combinations when Azure is the initiator for the tunnel.

Phase-1

  • AES_256, SHA1, DH_GROUP_2
  • AES_256, SHA_256, DH_GROUP_2
  • AES_128, SHA1, DH_GROUP_2
  • AES_128, SHA_256, DH_GROUP_2

Phase-2

  • GCM_AES_256, GCM_AES_256, PFS_NONE
  • AES_256, SHA_1, PFS_NONE
  • AES_256, SHA_256, PFS_NONE
  • AES_128, SHA_1, PFS_NONE

Responder

The following sections list the supported policy combinations when Azure is the responder for the tunnel.

Phase-1

  • AES_256, SHA1, DH_GROUP_2
  • AES_256, SHA_256, DH_GROUP_2
  • AES_128, SHA1, DH_GROUP_2
  • AES_128, SHA_256, DH_GROUP_2

Phase-2

  • GCM_AES_256, GCM_AES_256, PFS_NONE
  • AES_256, SHA_1, PFS_NONE
  • AES_256, SHA_256, PFS_NONE
  • AES_128, SHA_1, PFS_NONE
  • AES_256, SHA_1, PFS_1
  • AES_256, SHA_1, PFS_2
  • AES_256, SHA_1, PFS_14
  • AES_128, SHA_1, PFS_1
  • AES_128, SHA_1, PFS_2
  • AES_128, SHA_1, PFS_14
  • AES_256, SHA_256, PFS_1
  • AES_256, SHA_256, PFS_2
  • AES_256, SHA_256, PFS_14
  • AES_256, SHA_1, PFS_24
  • AES_256, SHA_256, PFS_24
  • AES_128, SHA_256, PFS_NONE
  • AES_128, SHA_256, PFS_1
  • AES_128, SHA_256, PFS_2
  • AES_128, SHA_256, PFS_14

SA Lifetime Values

These life time values apply for both initiator and responder

  • SA Lifetime in seconds: 3600 seconds
  • SA Lifetime in Bytes: 102,400,000 KB

Custom IPsec policies

When working with custom IPsec policies, keep in mind the following requirements:

  • IKE - For IKE, you can select any parameter from IKE Encryption, plus any parameter from IKE Integrity, plus any parameter from DH Group.
  • IPsec - For IPsec, you can select any parameter from IPsec Encryption, plus any parameter from IPsec Integrity, plus PFS. If any of the parameters for IPsec Encryption or IPsec Integrity is GCM, then the parameters for both settings must be GCM.

The default custom policy includes SHA1, DHGroup2, and 3DES for backward compatibility. These are weaker algorithms that aren't supported when creating a custom policy. We recommend only using the following algorithms:

Available settings and parameters

Setting Parameters
IKE Encryption GCMAES256, GCMAES128, AES256, AES128
IKE Integrity SHA384, SHA256
DH Group ECP384, ECP256, DHGroup24, DHGroup14
IPsec Encryption GCMAES256, GCMAES128, AES256, AES128, None
IPsec Integrity GCMAES256, GCMAES128, SHA256
PFS Group ECP384, ECP256, PFS24, PFS14, None
SA Lifetime integer; min. 300/ default 3600 seconds

Next steps

For steps to configure a custom IPsec policy, see Configure a custom IPsec policy for Virtual WAN.

For more information about Virtual WAN, see About Azure Virtual WAN and the Azure Virtual WAN FAQ.